Mostafa R Ahmed , Ph.D.

Courses Added

Academic Experience

• Associate Prof., Jan 2012 - up till now
  Mechanical Dept. (AASTMT)

• Assistant professor, Jan 2009 - Jan 2012
  Mechanical Dept. (AASTMT)

• Assistant professor, Jan 2002 - Jan 2010
  Production and Mechanical Design Department (Ain Shams University)

• Teaching Assistant, Jan 1996 - Jan 2002
  Production and Mechanical Design Department (Ain Shams University)

• Administrator, Jan 1992 - Jan 1996
  Production and Mechanical Design Department (Ain Shams University)

Work Experience

• consultant, Jan 2006 - Jan 2009
  technical office
  Eastern Company
   Design and manufacturing of an auto-feeder machine.
   Design and manufacturing of a weighing and conveyor machine.
   Design and manufacturing of a universal testing mixer.
   Design

• consultant, Jan 2004 - Jan 2012
  Technical
  Arab Contractors
   Design and implementation the methodology and equipments of 120 ton Ramsis II statue transportation, 2004-2006.
   Design and manufacture of side cars of settlement-tank bridge (10 off), 2009.
   Des

• consultant, Jan 2003 - Jan 2012
  technical office
  Al Fateh Group
   Supervisor of the technical office:-
  • Flange welding line.
  • Corrugated sheet shear press (4mm Th.).
  • Four roll bending machine.
  • Over head traveling and gantry cranes (3, 5, 10, and 20 tons – 24 m sp

• consultant, Jan 1996 - Jan 2003
  المكتب الفنى
  Roshdy Metal Industries
   Director of mechanical and hydraulic design office:-
  • Aluminum continuous casting and hot forming machinery
  • Full and semi displacement pilling machine.
  • Vibrating hummers and

Education

• PhD in Mechanical Design and Production Engineering, Ain Shams University - Faculty of Engineering, Nov 2002

• MSc in Mechanical Design and Production Engineering, Ain Shams University - Faculty of Engineering, Oct 1996

• BSc in Mechanical Design and Production Engineering, Ain Shams University - Faculty of Engineering, Jun 1992

List of Publications

• Mostafa R. A. Atia Salem A. Haggag Ahmed M. M. Kamal, "Enhanced Electromechanical Brake-by-Wire System Using Sliding Mode Controller" , Journal of Dynamic Systems, Measurement, and Control, vol. 138, no. 4, pp. 041003-041003-6, doi: 10.1115/1.4032484. (2016) .
        Read Abstract Download PDF
       

• Khaled M. Helal, Mostafa R. A. Atia Mohamed I. Abu El-Sebah, "Gain Scheduling Control with Multi-loop PID for 2-DOF Arm Robot Trajectory Control" , International Conference on Innovative Engineering Technologies, ID:IRES-ICIETDUB-29125-1618, Dubai, UAE. (2015) .
        Read Abstract Download PDF
       
• Ahmed A. Barakat, Mostafa R.A. Atia M. Abdel Salam, "Design and Modeling of an Improved Stiffness Boring Bar" , 2nd Industry Academia Collaboration Conference, Cairo, Egypt. (2015) .
        Read Abstract Download PDF
       
• Ahmed Ali Geneid, Ahmed Badawy, Mostafa R. A. Atia, "Blade Optimization Approach for a Vertical Wind Turbine" , 16th International conference on Aerospace Science and Aviation Technology, Cairo, Egypt. (2015) .
        Read Abstract Download PDF
       
• Mahmoud A. Elessawy, Mostafa R. A. Atia Mohamed I. Abu El-Sebah, "Automation of Focusing System based on Image Processing through Intelligent Algorithm" , International Conference on Innovative Engineering Technologies, ID:IRES-ICIETDUB-29125-1618, Dubai, UAE. , 2015.
        Read Abstract Download PDF
       

• Amany Khaled Mostafa Rostom A. Atia Tarek Moussa, "Grey Cast Iron Categorization using Artificial Neural Network" , International Journal of Scientific & Engineering Research, Volume 5, Issue 3, March-2014, ISSN 2229-5518 , 2014.
        Read Abstract Download PDF
        Read Research
• Mostafa Rostom Ahmed Atia, "Classification and Elimination of Overlapped Entities in DXF Files" , ASEJ-D-13-00120, Volume 5, pp. 851-860 (2014) .
        Read Abstract Download PDF
       
• S. J. Ebeid M. R. A. Atia M. M. Sayed, "Effect of Process Parameters on Abrasive Water Jet Plain Milling" , EL-AZHAR ENGINEERING THERTEENTH INTERNATIONAL CONFERENCE, December 23-25, 2014 (2014) .
        Read Abstract Download PDF
        Read Research
• S. J. Ebeid, Mostafa R. A. Atia, M. M. Sayed, "Prediction of Abrasive Water Jet Plain Milling Process Parameters Using Artificial Neural Networks" , Journal of Machinery Manufacturing and Automation, Volume 3, Vol. 3, Iss. 3, pp. 56-73 (2014) .
        Read Abstract Download PDF
       
• S.J. Ebeid, Mostafa R.A. Atia M.M. Sayed, "Effect of process parameters on abrasive water jet plain milling" , El-Azhar Engineering Thirteen International Conference, Cairo, Egypt (2014) .
        Read Abstract Download PDF
       
• Mahmoud M. M. El-Ashwah, W. Abbas, Tantawy M. Farid, Mostafa R. A. Atia, "Modeling and Simulation of Gear-Shift Controller for Automated Manual Gearbox Based on Neuro Fuzzy Control Logic" , Middle East J. Applied Science, vol. 4, no. 4, pp. 1000-1006 (2014) .
        Read Abstract Download PDF
       
• Ahmed Mohamed Kamal Salem Haggag Mostafa Atia, "Control of Electro-mechanical Brake-by-Wire System Using Sliding Mode Control" , International conference on industry academia collaboration, Cairo, Egypt, No. 59 , 2014.
        Read Abstract Download PDF
        Read Research

• H. A. Senbel, M. R. A. Attia and and S. M. A. Mahdy, "Effects of Wire-EDM Variables on Surface Roughness, Micro Hardness, Kerf Thickness and Rate of Metal Removal" , Journal of Al Azhar university, Engineering Sector, JAUES, 2011, vol. 6, no. 18, pp. 305-319 , 2011.
        Read Abstract Download PDF
       

• M. M. Koura, M. A. Awad, M.R.A. Atia, T. Hassan, "Development of a computer vision system for metrological applications" , Ain Shams Journal of Mechanical Engineering, ASJME, 2011 Cairo, Egypt, vol. 1, pp. 63-74. , 2010.
        Read Abstract Download PDF
       
• Mohamed Abdel Salam Aly, M. M. Taha Hedaya., "In Situ Balancing of a Rotor Supported on Dynamically coupled Supports Using Vibration Measurement" , 8th International Conference On Production Engineering & Design For Development, PEDD8, Cairo, Egypt, pp. 225-230. , 2010.
        Read Abstract Download PDF
       

• Maksoud, T.M.A, "Binary image enhancement via augmented self organizing mapping artificial neural network" , Proceedings of the ICME 2004 – 4th CIRP Int. Seminar on Intelligent Computation in Manufacturing Eng., Ischia (Naples), taly, pp. 225-230 , 2004.
        Read Abstract Download PDF
       

Affiliation

• A member at the Egyptian Engineering Syndicate
  

Teaching

• Mechanical Drawing, ME252
  Machine Design I, ME356
  Machine Design II, ME357
  Computer Aided Design, ME455
  Research Methods, ME711
  CAD/CAM, ME757

Fields of Interest

• Machine design